Problem with Storagespaces LSI9207-8e and intel jbod2224s2dp

I´m trying to setup storagespaces on two server and a Intel jbod, the setup is:

Two HP DL 380p Gen 8 servers with a LSI 9207-8e card connected with two SAS cables to a Intel jbod2224s2dp.
Cable Setup: Nod1 to jbod connector A primary and A secondary
Nod2 to jbod connector B primary and B secondary


When I run the Powershell Command "get-storageenclosure" (on either server). The Status that comes up is "Unhealthy", but the column "ElementTypesInError" is empty, so I can not detemine whats wrong.

And when I look at "Server Manager - File and Storage Services - Volumes - Storage Pools" Server one get all info, including Chassi info and One server just get basic info.
If I disconnect the SAS cables (with the server power on) and do a refresh, reconnect the cables and do a new refresh. The server get all info including the chassi info.


I have updated to the latest FW (v0.13.0.9) on the JBOD, HBAs (P20 Firmware) and server (P70 08/02/2014).
I have changed SAS cables.

I have submitted a service request to Intel and they say it has nothing to do with the JBOD, it is a problem with the LSI chip controllers.
I have submitted a service request to LSI and the I should downgrade the FW to P19.
I downgraded FW on the HBAs, no difference.

Does anyone have any suggestions?