For REFS what's the value for "Bytes Per FileRecord Segment"

While running fsutil fsinfo ntfsinfo [DRV], the results returned values like

C:\Tool>fsutil fsinfo ntfsinfo c:
NTFS Volume Serial Number :       0x08541557541548b8
NTFS Version   :                  3.1
LFS Version    :                  2.0
Number Sectors :                  0x00000000573c07ff
Total Clusters :                  0x000000000ae780ff
Free Clusters  :                  0x0000000003721796
Total Reserved :                  0x0000000000001340
Bytes Per Sector  :               512
Bytes Per Physical Sector :       4096
Bytes Per Cluster :               4096
Bytes Per FileRecord Segment    : 1024
Clusters Per FileRecord Segment : 0
Mft Valid Data Length :           0x0000000020180000
Mft Start Lcn  :                  0x00000000000c0000
Mft2 Start Lcn :                  0x0000000000000002
Mft Zone Start :                  0x0000000002a9bcc0
Mft Zone End   :                  0x0000000002aa3300
Resource Manager Identifier :     A6A38FE6-8FF6-11E2-A5A0-A0B3CCCDE416

Out of all these I'm interested in "Bytes Per FileRecord Segment" which would either be 1024 or 4096 (when formatted with /L).  The command above is good when used on a NTFS filesystem only.

If any one can help me to get this value for REFS and identify a way to get it from WMIC.

thanks.

yup